RDSO Part-A Approved Manufacturing Facility

Workshop Floor & Manufacturing Gallery

High-resolution photographic evidence of heavy plate profiling, CNC radial drilling, automated submerged arc welding (SAW), SA 2.5 abrasive blasting, and railway bridge trial assemblies.

0 MT / Annum RDSO Capacity
4 Workshop Bays (24m Span, 25T Cranes)

Displaying 8 Inspection Verification Records

CNC Heavy Plate Profile Cutting & Edge Preparation
Cutting (Bay 1)
Zoom

Koike Flexigraph Multi-Torch CNC

Cutting Shop • Bay 1

CNC Heavy Plate Profile Cutting & Edge Preparation

Bed: 3m x 12m • Thickness up to 100mm • Automated Nesting

Automated oxy-fuel and high-definition plasma plate cutting with computerized nesting software for bridge webs, flanges, and splice plates.

RDSO Audit Verified
Precision Radial & CNC Plate Drilling for Splice Joints
Drilling (Bay 2)
Zoom

BOIS CNC Plate & HMT RM-65 Radial Drills

Drilling Shop • Bay 2

Precision Radial & CNC Plate Drilling for Splice Joints

Drilling Dia up to 80mm • Tolerances ±0.2mm • HSFG Bolting

High-precision drilling rigs for bridge girder splice plates, web connection joints, and structural gussets with strict pitch tolerances.

RDSO Audit Verified
Submerged Arc Welding (SAW) & Continuous Girder Fabrication
Welding (Bay 3)
Zoom

Lincoln 1000A SAW Tractors & Fronius MIG

Welding Bay • Bay 3

Submerged Arc Welding (SAW) & Continuous Girder Fabrication

AWS D1.5 & IRS B1 Certified • Deep Flange-to-Web Penetration

Heavy beam SAW tractor welders executing continuous, full-penetration fillet and butt welds on heavy railway bridge girder assemblies.

RDSO Audit Verified
Automated SA 2.5 Abrasive Shot & Sand Blasting Chamber
Surface Prep (Bay 4)
Zoom

Enclosed Girder Shot Blast Chamber

Surface Prep • Bay 4

Automated SA 2.5 Abrasive Shot & Sand Blasting Chamber

SA 2.5 Surface Roughness • Profile 40-60 µm • Zero Moisture

Thorough removal of mill scale, rust, and oil residues prior to primer application, guaranteeing maximum paint adhesion under IRS standards.

RDSO Audit Verified
Airless Epoxy Zinc Phosphate Primer & Polyurethane Topcoat
Painting (Bay 4)
Zoom

Graco 450-Bar High Pressure Airless Spray

Coating Bay • Bay 4

Airless Epoxy Zinc Phosphate Primer & Polyurethane Topcoat

Total DFT: 225 µm (3-Coat) • RDSO M&C/PCN/102 Compliant

Controlled application of zinc-rich epoxy primer, micaceous iron oxide (MIO) intermediate, and UV-resistant aliphatic PU finish.

RDSO Audit Verified
Full-Scale Railway Bowstring Girder Trial Assembly Floor
Assembly Yard
Zoom

Laser Alignment & Precision Camber Audit Floor

Trial Erection Yard

Full-Scale Railway Bowstring Girder Trial Assembly Floor

Spans: 30.5m to 61m • 100% Pre-Dispatch Fitment Guarantee

Complete shop trial erection of open-web and bowstring arch spans to verify bolt hole alignments, cambers, and splice geometries.

RDSO Audit Verified
Railway Steel Bowstring Arch Bridge Erection & Launching
Bridge Erection
Zoom

Heavy Crawler Cranes & Hydraulic Winch Track

Site Launching Operation

Railway Steel Bowstring Arch Bridge Erection & Launching

Axle Load: 32.5T Heavy Freight • Night Mega-Block Launching

Engineered site erection and incremental launching of massive railway overbridge (ROB) spans across active electrified railway corridors.

RDSO Audit Verified
Navigational Channel Bowstring Steel Girder Span
Waterway Span
Zoom

Composite Orthotropic Deck & Parabolic Box Ribs

Heavy Infrastructure Span

Navigational Channel Bowstring Steel Girder Span

Design Life: 100+ Years • Fatigue Class UIC-774-3R

Completed open-web navigational channel bridge span engineered to withstand high wind loads, seismic forces, and continuous railway traffic.

RDSO Audit Verified
Comprehensive Quality Assurance Plan (QAP)

Manufacturing Rigor & NABL Laboratory Surveillance

Every photograph in this archive represents live manufacturing activities verified under RDSO B&S guidelines, IRS B1-2001 (Welded Bridge Code), AWS D1.5 bridge welding specifications, and NABL accredited ultrasonic and radiographic testing.